|
高强磨粉机(介绍 价格 图片)适用于粉碎重晶石、石灰石、陶瓷、矿渣等莫氏硬度不大于9.3级，湿度在6%以下的非易燃易爆的矿山、冶金、化工，建材等行业280多种物料的高细制粉加工，成品粒度在80-425目范围调节（最细1000目）。高强磨.高强磨粉机通过机内增加的特殊装置，可生产出30-80目的粗粉。
高强磨粉机工作过程
高强磨粉机主机内，磨辊吊架上紧固有1000-1500公斤压力的高压弹簧。高强磨.高强磨粉机开始工作后，磨辊围绕主轴旋转，并在高压弹簧与离心力的作用下，紧贴磨环滚动，压力比同等动力条件下的雷蒙磨粉机高1.2倍，所以产量大为提高。当被磨物料进入磨腔后，由铲刀铲起送入磨辊与磨环之间进行碾压，碾压后粉末随鼓凤机的循环风带入分析机，合格细粉随气流入旋风集粉器即为成品，大颗粒物料落回重磨。循环风返回鼓风机再重复以上过程，余风则进入袋式除尘器净化。当磨辊与磨环的磨损达到一定程度后，调整高压弹簧长度，保持磨辊与环之间恒定碾压力。从而保证稳定的产量
Highpressure micropowder grinder
The machine is used for grinding the barite, limestone, kaolin, cerames, ahd slags, etc, below scale 9.3 of Mohs hardness and 280-odd sorts of non-inflammable and non-explosive stuff in the trades of mining, metallurgical industrial, chemical engineering and building material for high fine powder generation and processing. The product size is adjustable in the range of 80-425 (1000 the finest) meshes. It is possible to product 30-80 mesh coarse powder through special device in the machine.
Work process:
In the main frame, a 100-1500 kg powered pressure spring is fixed to the roller suspender. After the grinder is put into effect, the roller rotates around the main shaft, and rolls closely against the ring pressed by the high pressure spring and centrifugal force. And its rolling pressure ration is 1.2 times higher than that of the raymond grinder under the same power condition and the production output is raised to substantial degree.
When a certain degree of wear of roller and ring is effected, it is recommended to adjust the length of the spring to maintain the constant pressure between the roller and the ring. As a result, the stable output and fineness are ensured.
|
|
高强96 High-strength96 |
高强95 High-strength95 |
高强93 High-strength93 |
高强86 High-strength86 |
高强83 High-strength83 |
进料粒度
（毫米） |
≤25 |
≤15 |
≤25 |
≤20 |
≤20 |
成品粒度
（毫米） |
0.125-0.044 |
0.125-0.044 |
0.613-0.013 |
0.125-0.044 |
0.125-0.044 |
根据不同
物料班产量 |
4-55 |
3-38 |
3.5-40 |
3-33 |
3-31 |
中心轴转速
（转/分） |
130 |
130 |
160 |
160 |
160 |
磨环内径
（mm） |
970 |
950 |
910 |
830 |
830 |
磨辊直径
（mm） |
320 |
310 |
300 |
270 |
270 |
磨辊与磨环高度
（mm） |
160 |
170 |
160 |
150 |
150 |
主机电机
（KW） |
y225m-4-45 |
y225s-4-37 |
y225m-8-30 |
y225m-8-22 |
y225m-8-22 |
风机电机
（KW） |
y200L-4-37 |
y200L-4-30 |
y180m-2-22 |
y160E-4-15 |
y160E-4-15 |
分析器电机
（KW） |
yc120-4A-5.5 |
yc122-4A-5.5 |
y112m-6-3 |
y112m-6-2.2 |
y112m-6-2.2 | |
销售部电话
